Puddle Buddy RSD150A-CRAB Residue Drainage Puddle Pump With Crab Float 240v
BEST ONLINE PRICES
FREEPHONE 0800 112 3134 if you've seen it cheaper.
* Available where Guaranteed Stock Icon Appears Below
Puddle Buddy RSD150A-CRAB Residue Drainage Puddle Pump With Crab Float 240v - 012-150A-CRAB
The Puddle Buddy residue pump fitted with automatic Crab sensor from JS is a versatile semi-contractors automatic puddle pump which is designed for clean water applications where nuisance standing water is present such as cellars, basements, garages, flat roofs, car parks etc.
With the addition of the crab sensor, whilst resting on a flat surface, it remains weighted to the bottom, allowing the Crab sensor to detect the presence of water on the floor. A magnetic key is supplied which allows the user to adjust the delay time of the start and stop sequence according to your own needs at site level.
The factory settings for the Crab sensor are that the pump turns on 5 seconds after the sensor detects water and turns off 30 seconds after the sensor no longer detects water.
Cable length of the Crab sensor is 30cm.
Requires a minimum of 5mm of water to operate and is required to be primed on initial use.
Discharge: One inch male top outlet supplied with 1" 3/4" 1/2" step adapter female hose tail.
Plastic outer cover, lower motor/bearing housing, impeller, pump housing and strainer reduces weight while making no compromise on quality. Single silicon mechanical seal in a lubricated chamber with a single oil seal in the media.
Supplied with ten metres of power cable. These pumps must not be installed/left laying on their side.
The anti-airlock prevents the puddle buddy from air locking.
The oil filled motor, provides perfect cooling which enables the pump to run dry for prolonged periods
The use of strong and flexible elastomers makes the pump very light weight while providing a strong and rugged pump suitable for semi-professional use.
Features:
- plastic pump body
- plastic impeller
- max solids 1mm
Applications:
- domestic duty/light commercial
- clean water
- residue water
- basements
- lift shafts
| SKU | 012-150A-CRAB |
|---|---|
| Weight | 5.3 Kg |
| Dimensions | 265mm x 138mm |
| Manufacturers | JS Pumps |
| Manufacturers Warranty | 1 Year |
| Material | Plastic |
| Connection Type | 1 Inch BSP Male |
| Voltage | 240V 1Ph 50Hz |
| Max Flow | 100l/min |
| Max Head | 7m |
| Full Load Current (FLC) | 1.4A |
| Motor Size | 0.15kW |
| Cable Length | 10 Metres |
| Float Switch | Yes |
Delivery
We offer free standard delivery to any UK address on a 3-5 working day delivery time on all orders over the value of £60 + vat. This is not weight restricted
Next day delivery is charged at £8.50 + vat for items under 35kgs. Orders need to be placed before 5pm Mon-Thurs or 4:30 on Friday for guaranteed Next Day Delivery.
Next day delivery is not avaialble for UK Highlands and Islands. Please click the following link to view postcodes/areas that don't qualify for next day delivery.
Due to some product specifications, there may be a lead time of up to 4 weeks. This is only on a small number of products and you will be contacted upon purchase and entitled to a full refund if required.
For Items over 35kgs, please review our delivery charges here
For full delivery terms please click here
International Delivery
Please click here to view International delivery rates.
If you want your order delivered to a remote area please contact our one of our Sales Representatives on 0800 112 3134 before placing your order and we will assist you further.
Returns
Unused, unaltered items may be returned at the buyers expense for credit upon Online Pump Supplies prior written consent and upon the terms specified by Online Pump Supplies. The buyer assumes all risk of loss of such returned goods until actual receipt and acceptance by Online Pump Supplies. Please click here to view Returns information.
